California, Washington, Oregon, Arizona
8:00 AM - 8:00 PM

Monday - Sunday

How to Secure TV to Wall: 6 Methods for Securing the TV

Rate this post

One of the most common questions people have is how to secure TV to wall. This article will go over how you can do this with different methods so that you can choose which one is best for your situation.

Secure the TV to a stud in the wall

One way to secure the TV mount is by securing it directly to a stud in the wall. To do this, you will need:

– Two lag bolts with washers and nuts that are at least one inch long

– Stud finder (optional)

The first step is finding where the studs are located behind your television using a stud finder. If you don’t have a stud finder, then you can try to feel the wall with your hand and see how sturdy it feels; this should be where the studs are located behind your television. Once you found where they are located, use a pencil or pen to mark through the drywall on either side of them.

Once you have marked where the studs are located, make a hole in one of them with a drill. Use your pencil or pen to mark how deep it will need to be for the lag bolt, and then drill into that spot as far as indicated on the drywall. Make sure there is enough room for both bolts so they can go in with a washer and nut on either side.

Once you have drilled the hole, place one of the lag bolts in it and then put a washer over it followed by another piece of drywall. Secure this to the wall using screws that are as long as your lag bolt is so there will be enough room for the other screw once you get the other lag bolt in place.

Use an anti-tip bracket for TVs that are on furniture

An anti-tip bracket is another option to secure your TV. These are fairly affordable and easy to install. To do this, you will need:

– Anti-tip bracket that has been designed for how heavy the television is

– Stud finder (optional)

Place a TV cabinet or entertainment center 

If you have a cabinet or entertainment center in front of your TV, then it can be secured to the wall by attaching an anti-tip bracket on the back. You may also want to consider how heavy your tv is and how much weight capacity there will need to be for this type of installation.

Alternatively, if you don’t have a cabinet or entertainment center, then you can attach an anti-tip bracket to the wall and use it as a TV stand.

Install a safety strap kit around your tv 

If you don’t have a cabinet or entertainment center to attach an anti-tip bracket to, then another option is attaching the safety strap kit around your TV and securing it with bolts. This will reduce how much weight it can hold but may still be able to save your TV from falling over.

Use cable ties to tie down wires 

If you have a lot of wires coming from your TV, then it can be helpful to use cable ties on the ends of each wire. This will keep them secure and prevent them from being tangled up with one another which could potentially lead to some damage.

Put bumpers on all four corners of your tv stand 

Bumpers are another option to secure your TV. These can be purchased fairly inexpensively and will provide a barrier between the TV stand or mount from being bumped into by someone else in your home.

Conclusion

Securing your TV to the wall is one of those things that you might think about but never get around to doing. And then when it’s time for guests over, and they want to watch their favorite show, you have a big problem on your hands! But don’t worry we are here with our list of easy ways for securing tv to the wall. We hope this information helps make sure you can enjoy hosting parties without worrying whether or not someone will see your TV dangling from a wire – which isn’t very attractive by the way! So what method did you choose? Let us know in the comments below!

How to Secure TV to Wall: 6 Methods for Securing the TV

Leave a Reply

Your email address will not be published. Required fields are marked *