California, Washington, Oregon, Arizona
8:00 AM - 8:00 PM

Monday - Sunday

How to Install a TV in Your Car: Step by Step Guide

5/5 - (3 votes)

How to install a TV in your car? Installing a TV in your car is not an easy task. It requires a lot of patience, time, and expertise to get everything set up just right. Lucky for you, we’ve done all the hard work for you! This article will show how to install a TV in your car step by step so that it’s both safe and secure. Read on below to learn car TV installation!

Find a location to place the TV in your car

Before you start installing your TV, it’s important to choose a location for the car. You have two options: either install the TV in the center console or behind the driver and passenger seat headrest. The first option is more difficult because of how far away from everyone else it will be; however, this means that no one can watch your TV but you. The second option is in the middle of two people, which can be nice for long trips or when watching a movie together with friends.

Another consideration to make before installing your TV is how much space you have available behind the headrests and seat backs. If there isn’t enough room, you may need to purchase a long extension cord.

Measure the width of your car 

One thing to keep in mind when installing a TV into your car is how wide it will be. You need to purchase a stand for your TV that’s as wide as or wider than the width of your vehicle, so make sure you measure before buying anything!

Purchase an LED TV for energy efficiency 

It’s important to choose a TV that is energy-efficient and long-lasting. LED TVs are the best choice because they use less energy than other types of TVs, so this will save you money on your electric bill!

LED TVs also last much longer than traditional models; how many hours depends on how often it gets used but generally stands at around 50,000 hours. This is a huge difference compared to how many hours typical TVs last which ranges from 200-1000 hours on average!

Remove the rear seat from your vehicle 

Now that you’ve purchased everything for your TV installation, it’s time to take the rear seat out of your vehicle. This will make it easier and safer when installing because there won’t be anything or anyone in the way!

Mount the TV on top of the stand

The next step is to mount the TV on top of the stand. You will need a drill and screwdriver for this, so make sure you have those ready! Drill holes in your car where the screws are located and use these as guides for how high or low you want them. Next, put washers through each hole and then thread one of the screws. Put a nut on top of each screw and tighten until it’s secure!

Connect all necessary cables 

Press the power button on your TV and plug it into a wall outlet to turn it on. Next, attach all necessary cables before reattaching your rear seats if you removed them earlier.

The last step is to test tv in your car! Turn off the lights in the room so that only one light source (like a lamp) is on.


How to install a TV in your car? The installation process can be overwhelming if you’ve never done it before. We are here to help and guide you through the entire process from start to finish so that your TV is mounted in no time! If you need a professional television installer, please contact us for more information or give us a call at (888) 937-9338.

How to Install a TV in Your Car: Step by Step Guide

Leave a Reply

Your email address will not be published. Required fields are marked *