How to Mount a TV on Vinyl Siding: Step-by-Step Guide

How to mount a tv on vinyl siding? Mounting a TV on vinyl siding is not as easy as it may seem. This step-by-step guide will walk you through the entire process, from start to finish, so that you can get your TV mounted on your home’s exterior in no time.

Determine the location of your TV on vinyl siding

The first step that you need to take is determining where your TV will be mounted. It’s important to make sure that the location of your mount perfectly matches up with the height and angle of your desired view for watching television before drilling any holes into vinyl siding or making any permanent marks on it. Once you have determined where your TV should be mounted, you can mark the spot with a small piece of masking tape.

Measure and mark the location 

Once you have marked where your TV should be mounted on vinyl siding, it’s time to measure and mark exactly how far down from the top of the full motion tv wall mounts that the bottom edge of the mount will need to extend. The first measurement is at what height above ground level you would like your TV mounted (generally between 72″ and 84″). The second measurement is the distance from that height (in inches) to where you will drill holes for mounting screws.

Purchase a mounting bracket 

After you have determined where your TV should be mounted and at what height, it’s time to purchase a mounting bracket that is compatible with the size of your TV. The center hole on some brackets will need an included lag bolt or wall stud for attaching to vinyl siding. If this isn’t possible, then make sure you buy a bracket that includes a drill bit to make the necessary holes.

Drill pilot holes into the vinyl siding at marked locations 

Once you have purchased your bracket, it’s time to drill pilot holes for the lag bolt or wall stud. First, make sure that you use a level and mark exactly where your TV will be mounted on vinyl siding before drilling any holes into the surface of the material.

After marking with a piece of masking tape, set up your bracket and drill pilot holes for the lag bolt or wall stud. Again, make sure that you use a level to ensure accuracy before marking the spot with chalk.

When installing your TV mount on vinyl siding, you must be careful not to put any pressure on the material where there will be no screws going in so as not to damage the surface.

Use lag bolts to mount bracket securely in place 

Once you have drilled pilot holes and mounted the brackets securely to vinyl siding with lag bolts, it’s time to install your TV onto the bracket. First, use a stud finder or other device to locate an appropriate location for mounting the TV on the wall so that when mounted correctly, there will be no more than five inches of the screen projecting past the edge of vinyl siding.

Next, screw in a mounting bracket to hold your TV securely and level. Make sure that you don’t tighten any screws too much so as not to crack or damage the surface of vinyl siding before putting on brackets for tv mount with lag bolts.

Stand up your TV and secure it to the mounts.

Have someone help you lift the TV onto its new resting place

The final step to mount a TV on vinyl siding is having someone help you lift the television onto its new resting place. Make sure that during this process, no one steps or stands anywhere near where there will be no screws going in so as not to damage the surface of your home’s exterior. After it has been secured, you can attach the cables and power strip.

Conclusion

How to mount a tv on vinyl siding? Mounting a TV onto vinyl siding is not as difficult as you may think. We’ve laid out the steps below to show how simple it can be with some preparation and planning ahead of time. If you need help installing your TV on vinyl siding, we are professional installers ready and waiting for any job! Whether you want us to mount your TV or if you have questions about selecting an appropriate mounting bracket, contact us today. Let our team take care of all your needs so that everything goes smoothly when it comes time for installation day. What do you think? Ready to get started? Contact us now!